Century label dispensers are versatile, simple
to use, reliable and tough. These label dispensers make it easy to apply labels in
any environment. The D50 through D3000 label dispensers come with software and each label
dispenser sounds an acoustic signal when the number of detached labels
reaches the preset quantity.
D10 Label Dispenser
Reflective sensor. One simple adjustment for
label length. A special reflective sensor sits below the label to sense
the leading edge of the label. As a label is picked up, the next one is
automatically advanced. The design presents the label at the front of
the machine, providing optimum convenience for both left-handed and
right-handed operators. A High-low speed switch allows adjustment for
label length or operator preference. There are no mechanical position
switches to cause adjustment or operational problems. The stainless
steel models are ideal for food industry and pharmaceutical
applications. Easy loading, works with labels as short as 1/4", 9" x 9"
footprint
Not for transparent
labels. Label width: 1/2" to 4.5", Label length: .25" to 8" or more,
Roll Diameter: 8.6" max, Core ID: 1.5" to 3", 9" x 9" footprint View Brochure
D40 Label Dispenser
The Century D40 Label Dispenser
is an economical alternative that makes it easy to apply labels. Two buttons
allow the user to choose between a manual or an automatic detachment of the
label. By using an adjustment knob, the user can set the label's length to
detach from 0.19" up to 3.14"
The Century D30 Label Dispenser
is an economical semi-automatic label dispenser that makes it easy to apply labels. Two buttons
allow the user to choose between a manual or an automatic detachment of the
label. By using an adjustment knob, the user can set the label's length to
detach from 0.19" up to 3.14"
The Century D20 Label Dispenser
is an economical semi-automatic label dispenser that makes it easy to apply labels. Two buttons
allow the user to choose between a manual or an automatic detachment of the
label. By using an adjustment knob, the user can set the label's length to
detach from 0.19" up to 3.14"
